Darwi Varnish 30 ml Glossy

Darwi alcohol-based protective lacquer is clear after drying. It gives your work a ceramic finish and it is also resistant to any damage!

It is used to protect your creations with Darwi self-hardening clay or Darwi Form plaster. You can also varnish various objects that you want to protect or paintings.

The varnish is available in satin-finished or glossy, in 30, 100, 250 or 500 ml.

The matte and glossy declinations are also available in spray to guarantee a uniform application in every nook and cranny. Pay attention to the use of the spray which should ideally be done outdoors.

How to use the alcohol-based Darwi varnish?

Prepare the surface where you will apply this protective varnish. It must be clean and dry.

After applying a thin coat of paint with a brush, you notice that the brush streaks disappear after a few minutes. The varnish flattened, starting to dry. Wait 3 hours before applying a second coat. After 3 layers you will notice the very aesthetic "ceramic" finish that appears.

Clean your tools with Darwi Brush Cleaner or with a degreaser such as alcohol, ethanol or methanol.

Why buy the Darwi varnish?

• Deep hardening allows great strength after drying

• The spray makes it easy to varnish detailed objects

• The shine is very beautiful and the brush marks disappear after one to two minutes

This varnish is manufactured in our factory in Wandre, Belgium.

If you require further information on this product, please do not hesitate to contact our team to the following phone number : +32 4 362 19 90 or via e-mail : info@clay-and-paint.com